Air Hose Fittings & Accessories – Steelman Tools

Replace a worn hose on an existing inflator gauge or assemble a custom gauge with the STEELMAN 60036 5-Foot Rubber Air Hose with 1/4-Inch PS and 3/8-Inch -24 Brass Fittings.

Steelman 5-Foot Rubber Air Hose with 1/4-Inch NPS and 3/8-Inch -24 Brass Fittings 60036

The Steelman 1526A Cut-Off Tool with Metal Guard is an ideal tool when the job facing you requires heavy-duty cutting power. With a maximum free run speed of 20,000 RPM this pneumatic tool will slice through metal stock, rebar, bolts, pipes and straps faster than any hacksaw ever could.

Steelman 1526A 3-Inch Cut-Off Tool with Metal Guard

This fitting is constructed of durable, rust-resistant brass. The two-piece design threads together around the end of a 3/8-inch inner diameter rubber or synthetic air line and creates a tight seal with a 1/4-inch NPT male threaded fitting on the end.

Steelman 60366 3/8-Inch ID Reusable Brass Pneumatic Hose Fitting

Durable fittings - hose comes capped with durable brass fittings and kink-resisting bend protectors on each end 25-foot length - hose's 25-foot length

Steelman 25-Foot x 3/8-Inch ID Rubber Air Hose for Pneumatic Tools, 1/4-Inch NPT Brass Fittings, 300-PSI Working Pressure, Abrasion/Chemical

Steelman 50049-IND 25-Foot 3/8-Inch ID Air Hose with Reusable 1/4-Inch NPT Brass Fittings

Steelman 50049-IND 25-Foot 3/8-Inch ID Air Hose with Reusable 1/4-Inch NPT Brass Fittings

STEELMAN Straight Chuck Tire Inflator with Built-In-Gauge and 12-inch Hose in the Air Compressor Accessories department at

15-foot length -coiled 15-foot long hose reaches across garages and workshops then contracts for compact storage Kink resistant - durable polyurethane

Steelman 15-Foot Coiled 3/8-Inch ID Air Hose with Reusable 1/4-Inch NPT Brass Fittings, Kink and Abrasion-Resistant Polyurethane Tubing

This durable solid brass fitting is ideal for use in compressed air lines. The two-piece design threads together around the end of a 1/2-inch diameter rubber or synthetic air line and creates a tight seal with a 1/4-inch NPT male threaded fitting on the end.

Steelman 1/2-Inch ID Reusable Brass Pneumatic Hose Fitting 99474

The STEELMAN 75051 Straight Chuck Tire Inflator with Built-In Gauge and 12-Inch Hose is a durable, compact addition to your air compressor's accessory kit. Its tapered design is easy to use and the push on inflator tip works with several valve types used on both cars and trucks. With a polished steel main casing and brass fittings that can easily hold up to long use. The 12-inch long, 1/4-inch diameter hose allows you to easily reach hidden valves as well as reach around corners.

Steelman 75051 Straight Chuck Tire Inflator with Built-In Gauge and 12-Inch Hose

These couplers are constructed of durable, rust-resistant brass to prevent water line condensation from causing premature failure. The locking slide collar features a knurled surface for a solid grip, even when wearing gloves or in oily conditions.

Steelman 60333 1/4-Inch Industrial Brass Coupler 1/4-Inch male NPT 10-Pack

The solid brass fitting is corrosion-resistant to prevent water line condensation from causing premature failure. Its hex-shaped section is easy to tighten onto tools with an adjustable or appropriately sized wrench.

Steelman 75075-IND 3/8-Inch male to 1/4-Inch male NPT Brass Reducer Fitting for Pneumatic HOSES

STEELMAN 60038 15-Foot Rubber Air Hose with 1/4-Inch NPS and 3/8-Inch -24 Brass Fittings

This compact, coiled hose is made from premium abrasion resistant polyurethane that easily outmatches rubber and nylon for wear resistance which comes in handy when working around unfinished or bare concrete floors.

Steelman Coil Hose,Disconnect Fittings,25 ft. 50041-IND