Toggler AF8 alligator anchors

TOGGLER® AF8 Flanged Alligator Plug (Box 100)

Toggler Alligator Masonry Anchors, Flanged, 5/16-In., 20-Pk.

A10-50 Alligator Anchor (Without Flange)

Completely solid anchor with circular cross-section. Causes all forces from mating screw to be fully transmitted to the wall of the hole. Provides full compressive holding over entire length of screw. Flanged for use where a cavity is anticipated (drywall, hollow brick, etc.). Can be more closely spaced than other solid-wall anchors. Fins prevents spinning and countersink even when using a screw gun. Anchor bonds screw to concrete, brick and stone, sealing the hole against moisture.

Mechanical Plastics 50500 0.31 in. Toggler Alligator AF8 Flanged Solid Wall Anchors

Tulppa Toggler Alligator AF8 8mm laipalla + ruuvit 5kpl - K-Rauta

Generic TOGGLER ALLIGATOR AF6 Flanged Anchor with Screws

Toggler alligator, 6 pack, 5/16 diameter, af8 flanged solid wall anchors with 6 #12 x 1 3/4 screws, versatile & easy to install, works in any

Alligator Masonry Anchors, Flanged, 5/16-In., 6-Pk.

TOGGLER ALLIGATOR solid-wall anchors are the only anchors that extrude to the entire length of a screw. AF8 Toggler Alligator solid-wall anchors are designed to work with a 5/16 drill bit. The tensile strength has been rated at 3,083 lbs. in 4,000 psi concrete and 85 lbs. in 1/2 drywall.

Toggler AF8 Alligator Anchors

TOGGLER® AF8 Flanged Alligator Plug (Loose)

6-Pk) Toggler Af6 Anchor Plastic 1/4 50470

5/16 x 1-1/2 Poly-Propylene Plastic Alligator Wall Anchors

Alligator Anchors, Wall Fasteners

The TOGGLER ALLIGATOR® may look like a plastic plug, but it is not just an ordinary solid wall anchor. It provides the highest strength and

Toggler Alligator AF8 Flanged All-Purpose Plug Anchors